Study tips12 min read

Spaced repetition at university: how to schedule active recall for every module

Set Leitner and Anki intervals, write cards that test understanding and plan four modules from week 1 to exams, with practice questions.

Medly Team19 November 2026
On this page

Spaced repetition means testing yourself on the same material at growing gaps, so each review comes just as you start to forget it. This guide shows you how to set it up for a university semester with Leitner boxes or Anki, how to write cards and use VLE past papers, and how to plan four modules from week 1 to exams. It finishes with a sample lecture and five practice questions to turn into cards.

What is spaced repetition, and why does retrieval beat rereading?

Spaced repetition is a timing rule. You come back to each idea after a gap, and the gap grows each time you get it right. Active recall is what you do in each session: you answer from memory before you look. Put together, they are often called spaced retrieval practice.

The evidence for both is strong. In a 2006 study by Roediger and Karpicke, students who were tested repeatedly on a prose passage recalled 61% of it a week later. Students who reread it instead recalled 40%. Rereading did slightly better on a test five minutes later, which is why it feels like it works. After a few days, the advantage flipped.

A 2013 review of ten study techniques by Dunlosky and colleagues rated practice testing and distributed practice as the only two with high utility. Rereading, highlighting and summarising were rated low.

UK universities give the same advice. Southampton's library exam guide recommends practising recall and revisiting material across separate sessions. Cardiff's student blog covers spaced repetition, and Manchester's study guide points students to Anki. None of them sets out a schedule for each module, so the sections below do.

How to set Leitner box intervals for a 12-week semester

The Leitner system was described by the German science journalist Sebastian Leitner in 1972. It uses boxes of paper cards. Every new card starts in Box 1. Get it right and it moves up one box. Get it wrong and it goes back to Box 1. Higher boxes come up less often, so your time goes on what you don't know yet.

How far apart should the boxes be? In a 2008 study of more than 1,350 people, Cepeda and colleagues found that the best gap between reviews gets longer the further away the test is. As a share of the time left, though, it shrinks: about 20% when the test is a few weeks away, falling to about 5% when it is a year away. A semester exam is usually three to four months after your first lecture, so a top gap of two to three weeks fits.

BoxReview everyCards here are
Box 1Study dayNew or just missed
Box 23 daysRight once
Box 31 weekRight twice in a row
Box 42 weeksRight three times
Box 53 weeksSecure for now

Source: Medly's suggested intervals, based on the Leitner system and Cepeda et al. (2008). Last checked: 18 November 2026.

As the exam gets closer, the time left shrinks, so the gaps should shrink too. In the last three weeks before an exam, review Boxes 4 and 5 once a week.

Paper boxes suit modules with diagrams, structures or pathways you want to draw. Keep one set per module, or one shared set with a coloured dot for each module.

How to set up Anki for spaced repetition at university

Anki moves the cards for you. Its scheduler, FSRS (Free Spaced Repetition Scheduler), works out each card's next review from how you've answered it before. Instead of setting intervals, you choose a desired retention. The Anki manual sets the default at 90%, which it calls a good balance of retention and workload. FSRS works in Anki 23.10 and later, AnkiMobile 23.10 and later, and AnkiDroid 2.17 and later.

For a semester of four modules:

  1. Make one deck per module, and tag each card with its week, such as ECON101::W03. Tags let you review one lecture before its seminar.
  2. Turn on FSRS in the deck options and leave desired retention at 90%. Raise it only for material you need near-perfect recall of, such as drug names. A higher target means more reviews a day.
  3. Set a new-card limit you can keep up with across all four modules. If a teaching week gives you about 80 new cards, 15 to 20 a day clears them.
  4. Review every day, even for 15 minutes. A few missed days can turn into a backlog of hundreds of cards.
  5. Study from a parent deck that holds all four modules, so topics come up mixed, as they will in your head on exam day.

How to write flashcards that test understanding

University exams rarely ask for a definition on its own. They ask you to explain, apply, compare or calculate, so a deck full of definitions trains you for a different task. Four kinds of card get closer to what you'll be asked:

  • Why cards: "Why does X happen?"
  • Apply cards: a short case or a calculation with numbers.
  • Compare cards: "How does X differ from Y?"
  • Predict cards: "What happens to X if Y doubles?"

Keep each card to one idea. If the back needs more than three or four lines, split it into two cards. For essay modules, a card can hold an argument: the claim, two pieces of evidence and the strongest counterpoint. For law, a card can give a set of facts and ask for the rule and the case behind it, the same steps you use for problem questions.

Worked example

After a first-year economics lecture on elasticity, a student writes this card.

Front: What is price elasticity of demand (PED)? Back: How much quantity demanded responds to a change in price.

It's accurate, but an exam would ask you to use the idea. Here is the same lecture as three cards that do:

  1. Apply. Front: The price rises from £10 to £11 and quantity demanded falls from 200 to 170. What is the PED? Back: Quantity changes by −30 ÷ 200 = −15%. Price changes by +1 ÷ 10 = +10%. PED = −15 ÷ 10 = −1.5, so demand is price elastic.
  2. Why. Front: Why do goods with close substitutes tend to have elastic demand? Back: When the price rises, buyers can switch, so quantity falls by a larger share than price rises.
  3. Predict. Front: Demand is elastic. A firm raises its price. What happens to total revenue? Back: It falls, because quantity falls by a larger percentage than price rises. Here, £10 × 200 = £2,000 becomes £11 × 170 = £1,870.

How to use module past papers from your VLE as a question bank

Many UK universities post past exam papers on the module's VLE page (Moodle, Blackboard or Canvas) or in a library exam paper archive. Check your module page first, then the library. Single cards test facts. Whole questions test what cards miss: planning an answer, timing it and linking topics.

  1. In week 1 or 2, download the last three or four years of papers for each module. If a module is new and has none, ask the module leader for a specimen paper or sample questions.
  2. Split each paper into single questions and tag each one with the lecture or week it draws on.
  3. Once a topic has been taught, try one question on it within a week, from memory and timed.
  4. Mark it against the mark scheme or model answer if your module provides one. If you dropped marks, give the question a new date one week ahead. Get it right then, and its next date is three weeks ahead.
  5. Save full, timed papers for the revision weeks.

That is the Leitner system with whole questions instead of cards. To get practice answers marked, with feedback on where the marks went, you can use Medly's free plan. It includes 5 marked questions, 20 AI tutor messages and 1 uploaded paper a day, with no card needed.

A spaced repetition schedule for 4 modules, week 1 to exams

This plan assumes a 12-week semester, a reading week, then revision weeks and exams. Change the week numbers to match your own timetable.

WeeksNew cardsDaily reviewsPast papers
1 to 2After each lecture15 minCollect and tag
3 to 615 to 20 a day20 to 30 min1 per module a week
Reading weekCatch up gapsClear backlog1 long question each
7 to 1215 to 20 a day30 to 40 min2 per module a week
RevisionOnly for gapsTop gap 1 weekTimed paper, rotate
ExamsNoneNext exam onlyRedo missed ones

Source: Medly's suggested plan, with gaps based on Cepeda et al. (2008). Last checked: 18 November 2026.

A typical teaching-week day looks like this:

  1. Morning: 20 to 30 minutes of reviews, all four modules mixed.
  2. After each lecture: write 5 to 10 cards while it's fresh, using the four card types above.
  3. One evening slot per module each week: one past paper question, marked the same day.
  4. Sunday: 10 minutes to check that every lecture this week has cards, and fill any gaps.

You can download the 4-module semester planner as a spreadsheet and add your own module codes and exam dates. For more on turning notes into questions, see how to revise your notes so they stick.

Spaced repetition practice questions: 5 cards from a sample lecture, with answers

Here is a short extract from a first-year pharmacology lecture. Read it once, close it, then try the questions. Each answer ends with the card you'd write from it. For more dose maths, see these drug calculations.

Elimination half-life (t½) is the time taken for the plasma concentration of a drug to fall by half. Most drugs are eliminated by first-order kinetics: a constant fraction of the drug is removed per unit of time. Half-life depends on volume of distribution (Vd) and clearance (CL): t½ = 0.693 × Vd ÷ CL. With regular dosing, a drug builds up until the amount eliminated between doses equals the amount given. This steady state takes about 4 to 5 half-lives to reach, whatever the dose. For a drug with a long half-life, a loading dose can reach the target concentration sooner.

Question 1: (1 mark)

Define elimination half-life.

Answer

The time taken for the plasma concentration of a drug to fall by half.

Card to write. Front: Define elimination half-life (t½). Back: The time for plasma concentration to fall by half. This is the one definition card worth keeping from this lecture, because the other four build on it.

Question 2: (2 marks)

A drug follows first-order kinetics and has a half-life of 6 hours. At 08:00 its plasma concentration is 80 mg/L. No further doses are given. Work out the plasma concentration at 02:00 the next day.

Answer
  1. Time from 08:00 to 02:00 the next day = 18 hours.
  2. Number of half-lives = 18 ÷ 6 = 3.
  3. 80 mg/L halves to 40, then 20, then 10 mg/L.
  4. Concentration at 02:00 = 10 mg/L.

Most lost marks come from miscounting the hours across midnight.

Card to write. Front: t½ = 6 h. Concentration is 80 mg/L at 08:00. What is it at 02:00 the next day? Back: 18 h = 3 half-lives, so 80 ÷ 2³ = 10 mg/L. Once you know this card well, change the numbers so you practise the method and not the answer.

Question 3: (2 marks)

A drug has a volume of distribution of 42 L and a clearance of 7 L/h. Calculate its elimination half-life. Give your answer to 1 decimal place.

Answer
  1. t½ = 0.693 × Vd ÷ CL.
  2. 0.693 × 42 = 29.106.
  3. 29.106 ÷ 7 = 4.158 hours.
  4. t½ = 4.2 hours (1 d.p.).

Check that clearance is in litres per hour before you divide. If it's given in mL/min, convert it first.

Card to write. Front: Vd = 42 L, CL = 7 L/h. Find t½. Back: 0.693 × 42 ÷ 7 = 4.2 h.

Question 4: (1 mark)

Kidney impairment halves a patient's clearance of a drug. The volume of distribution does not change. What happens to the drug's half-life?

A. It halves

B. It stays the same

C. It doubles

D. It quadruples

Answer

C. It doubles

  1. t½ = 0.693 × Vd ÷ CL.
  2. Clearance is on the bottom of the fraction, so half-life is inversely proportional to it.
  3. Halving CL doubles t½.

Card to write. Front: CL halves and Vd stays the same. What happens to t½, and why? Back: It doubles, because t½ = 0.693 × Vd ÷ CL.

Question 5: (2 marks)

Explain why a drug given at regular intervals takes about 4 to 5 half-lives to reach steady state, whatever the dose.

Answer
  1. With first-order elimination, each half-life closes half of the remaining gap to steady state.
  2. After 1 half-life the drug is at 50% of steady state, then 75%, 87.5%, 93.75% and about 97% after 5.
  3. A bigger dose raises the steady-state level, but the time to reach it depends only on the half-life.

Card to write. Front: Why does steady state take 4 to 5 half-lives, whatever the dose? Back: Each half-life closes half the remaining gap (50, 75, 87.5, 94, 97%). Dose changes the level, not the time.

Notice that only Question 1 is a definition. The rest ask you to calculate, predict or explain, which is how the exam will use the idea. To practise more exam-style questions and get your answers marked with feedback, try Medly. You can ask the AI tutor about a step when you're stuck.

Frequently asked questions

How often should you review flashcards at university?

Every day, in a short session. Each card comes up less often as you get it right, from daily at first to every two or three weeks for cards you know well.

Is Anki good for university revision?

Yes. Its FSRS scheduler sets each card's next review from your answers, and you can keep one deck per module with tags for each week. Paper Leitner boxes work just as well if you'd rather draw on your cards.

What is the difference between active recall and spaced repetition?

Active recall is answering from memory before you check. Spaced repetition is when you do it, at gaps that grow as you get it right. They work best together.

How many flashcards should you make per lecture?

Five to ten good cards from an hour's lecture is usually enough if each one tests a single idea. If your daily reviews regularly take more than 45 minutes, write fewer, sharper cards.

Can you use spaced repetition for essay-based modules?

Yes. Put arguments, key studies, cases and counterpoints on cards. Space past essay questions too, by writing a 10-minute plan instead of a full essay.

Is it too late to start spaced repetition halfway through the semester?

No. Write cards for the topics that carry the most marks first, use the shorter revision-week gaps, and add the rest as you go.

Try Medly for free