Study tips10 min read

Biomedical science explained: the six core disciplines, with practice questions

Explore clinical biochemistry, haematology, microbiology, cellular pathology, immunology and transfusion science, with worked examples, year 1 modules and practice questions.

Medly Team17 November 2026
On this page

Biomedical science is the study of how disease affects the human body, and of the laboratory tests used to diagnose and monitor it. It is built on six core disciplines: clinical biochemistry, haematology, medical microbiology, cellular pathology, immunology and transfusion science. NHS Health Careers describes biomedical scientists as people who "conduct laboratory and scientific tests to support the diagnosis and treatment of disease". This guide explains each discipline with one worked example, shows which first-year modules lead into it, and ends with questions for you to try.

What is biomedical science?

Biomedical science is the science behind the hospital lab. A doctor takes a blood, urine or tissue sample, and a biomedical scientist works out what it shows.

In NHS laboratories the work is grouped into four areas: blood sciences, infection sciences, cellular sciences and genetics. Blood sciences covers clinical biochemistry, haematology, immunology and transfusion. Infection sciences is microbiology and virology. Cellular sciences is the study of tissue and cells. Genetics grows out of your degree's genetics modules and isn't covered here.

DisciplineWhat it studiesTypical tests
Clinical biochemistryChemicals in blood and urineGlucose, kidney and liver tests
HaematologyBlood cells and clottingFull blood count, clotting screen
Medical microbiologyBacteria, viruses, fungiCulture, Gram stain, PCR
Cellular pathologyTissue and cellsBiopsies, cervical screening
ImmunologyThe immune systemAntibody and allergy tests
Transfusion scienceBlood groupsABO and RhD grouping, crossmatch

Source: NHS Health Careers (specialist areas). Last checked: 17 November 2026.

The six core disciplines, with a worked example each

Each example below is the kind of short calculation or interpretation question that turns up in first and second year exams.

Clinical biochemistry

Clinical biochemistry measures the concentration of substances such as glucose, sodium and creatinine. Many assays use a colour change read by a spectrophotometer. Under the Beer-Lambert law (A = εcl), absorbance is proportional to concentration, so you can compare a patient sample with a standard of known concentration.

Worked example: a 5.0 mmol/L glucose standard gives an absorbance of 0.30. A patient's plasma, treated the same way, gives 0.45.

  1. Absorbance is proportional to concentration, so concentration = (sample absorbance ÷ standard absorbance) × standard concentration.
  2. Concentration = (0.45 ÷ 0.30) × 5.0 mmol/L.
  3. Concentration = 1.5 × 5.0 = 7.5 mmol/L.

You would then compare 7.5 mmol/L with the reference range the lab gives, because ranges vary between labs and with whether the patient has fasted.

Haematology

Haematology looks at red cells, white cells, platelets and clotting. The red cell indices tell you what kind of anaemia a patient might have. The mean cell volume (MCV) is the average size of a red cell.

Worked example: haematocrit (Hct) is 0.33 L/L and red cell count (RBC) is 4.4 × 10¹²/L. The reference range for MCV is 80 to 100 fL.

  1. MCV = Hct ÷ RBC = 0.33 ÷ 4.4 = 0.075 pL.
  2. 1 pL = 1,000 fL, so MCV = 75 fL.
  3. 75 fL is below 80 fL, so the cells are microcytic (smaller than normal).

Iron deficiency is the most common cause of a microcytic anaemia, so a ferritin test to check iron stores would be a sensible next step.

Medical microbiology

Medical microbiology identifies the organism behind an infection and which antibiotics will treat it. A core skill is the viable count: estimating how many live bacteria were in the original sample.

Worked example: a urine sample is diluted to 10⁻³. You spread 0.1 mL on an agar plate and count 45 colonies after incubation.

  1. Colonies per mL of the diluted sample = 45 ÷ 0.1 = 450 CFU/mL.
  2. Multiply by the dilution factor: 450 × 10³ = 450,000.
  3. The original sample held 4.5 × 10⁵ colony-forming units (CFU) per mL.

Cellular pathology

Cellular pathology studies tissue (histopathology) and loose cells (cytopathology) under the microscope. Before a pathologist can read a biopsy, the lab has to turn soft tissue into a slide thin enough for light to pass through.

Worked example: put the stages of tissue processing in order.

  1. Fixation, usually in formalin, to stop the tissue breaking down.
  2. Dehydration through increasing strengths of alcohol, to remove water.
  3. Clearing, to remove the alcohol so wax can get in.
  4. Infiltration and embedding in paraffin wax, to make a firm block.
  5. Cutting thin sections on a microtome, a few micrometres thick.
  6. Staining, most often with haematoxylin and eosin (H&E): haematoxylin stains nuclei blue-purple and eosin stains cytoplasm pink.

Immunology

Immunology studies the immune system, including allergies, autoimmune disease and immunodeficiency. A large part of the lab's work is detecting antibodies. IgM is the first antibody made in a new infection. IgG comes later and lasts much longer.

Worked example: a patient's blood is tested for antibodies to a virus. IgM is positive and IgG is negative. What does this suggest?

  1. IgM is made first, so its presence suggests a recent or current infection.
  2. IgG hasn't appeared yet, which fits the early stage of a first infection.
  3. Interpretation: a recent, first infection. A repeat sample a couple of weeks later would be expected to show IgG.

If the result were the other way round (IgG positive, IgM negative), it would point to a past infection or vaccination.

Transfusion science

Transfusion science makes sure a patient gets blood that their immune system won't attack. The lab checks the ABO and RhD group twice: once by testing the patient's red cells with known antibodies (forward group), and once by testing their plasma against known red cells (reverse group).

Worked example: here are a patient's results. Agglutination means the cells clumped.

TestResult
Red cells + anti-AAgglutination
Red cells + anti-BNo agglutination
Red cells + anti-DNo agglutination
Plasma + A cellsNo agglutination
Plasma + B cellsAgglutination
  1. The red cells carry A antigen but not B, so the forward group is A.
  2. The plasma contains anti-B but not anti-A, which confirms group A.
  3. No reaction with anti-D, so the patient is RhD negative.
  4. The patient is A RhD negative and can receive A RhD negative or O RhD negative red cells.

Which year 1 modules build each discipline?

First year rarely teaches the six disciplines by name. It teaches the biology and chemistry they rest on, and the clinical disciplines arrive in years 2 and 3. At Bath, the course page lists six compulsory year 1 units: biochemistry, cell biology, genetics, human physiology, core skills for bioscience, and practical research skills in biochemistry and biomedical sciences. At Surrey, the programme catalogue for 2026/7 lists eight year 1 modules, and the degree is accredited by the Institute of Biomedical Science (IBMS).

DisciplineBath year 1Surrey year 1
Clinical biochemistryBiochemistryFundamental Molecules and Processes in Biochemistry
HaematologyHuman physiologyPrinciples of Physiology and Practical Skills
Medical microbiologyCell biologyMicrobiology; Practical and Biomedical Bacteriology
Cellular pathologyCell biologyCell Biology
ImmunologyHuman physiologyCell Biology; Physiology
Transfusion scienceGeneticsMolecular Biology and Genetics

Source: University of Bath and University of Surrey course listings, 2026 entry. The links between modules and disciplines are our reading of the module titles. Last checked: 17 November 2026.

Modules change from year to year, so check the current list on the course page before you apply. If you want to work as a biomedical scientist in the NHS, an IBMS-accredited degree is the usual starting point; our guide to becoming a trainee biomedical scientist explains HCPC registration and pay.

Is biomedical science hard? The step up from A-Level Biology

It's a demanding degree, and very manageable if your A-Level Biology and Chemistry are secure. Most first years find the step up comes in a few specific places.

  • Chemistry matters more than you might expect. Biochemistry modules assume you're comfortable with moles, pH and reaction rates.
  • The maths is constant. Dilutions, unit conversions (fL, pg, × 10⁹/L) and simple statistics appear in practicals and exams alike.
  • Data interpretation replaces recall. You're given a set of results and asked what they mean, as in the worked examples above.
  • Lab reports count. At Bath, assessment includes closed and open book exams, data analysis practicals, essays, reports and presentations, with roughly 30% to 55% of the degree assessed by exam depending on your options.
  • You're expected to study on your own between lectures, with much less checking in than at school.

If you're still in Year 13, the best preparation is strong A-Level Biology and Chemistry. Medly sets exam-style A-Level questions in both and marks your answers, and the free plan includes 5 marked questions and 20 AI tutor messages a day. For the grades universities ask for, see our guide to biomedical science entry requirements.

Biomedical science practice questions with answers

These are written at first and second year level. Try each one before opening the answer.

Clinical biochemistry:

Question 1: (2 marks)

A serum creatinine result is above the analyser's range. The lab mixes 20 µL of serum with 180 µL of diluent and re-runs it. The diluted sample reads 95 µmol/L. Calculate the creatinine concentration to report.

Answer
  1. Total volume = 20 + 180 = 200 µL.
  2. Dilution factor = total volume ÷ sample volume = 200 ÷ 20 = 10.
  3. Reported concentration = 95 × 10 = 950 µmol/L.

Most lost marks come from dividing 180 by 20 and using a factor of 9. The factor uses the total volume.

Haematology:

Question 2: (3 marks)

A patient has haemoglobin (Hb) of 98 g/L, a red cell count of 3.0 × 10¹²/L and a haematocrit of 0.32 L/L. Calculate the MCV and the mean cell haemoglobin (MCH). Using an MCV reference range of 80 to 100 fL, state whether the red cells are microcytic, normocytic or macrocytic.

Answer
  1. MCV = Hct ÷ RBC = 0.32 ÷ 3.0 = 0.1067 pL.
  2. Convert: 0.1067 pL × 1,000 = 106.7 fL.
  3. MCH = Hb ÷ RBC = 98 ÷ 3.0 = 32.7 pg.
  4. 106.7 fL is above 100 fL, so the cells are macrocytic.

A macrocytic anaemia would lead the lab to check vitamin B12 and folate.

Medical microbiology:

Question 3: (2 marks)

A sample is diluted to 10⁻⁴. You spread 0.1 mL on an agar plate and count 62 colonies. Calculate the number of colony-forming units per mL in the original sample.

Answer
  1. Colonies per mL of diluted sample = 62 ÷ 0.1 = 620 CFU/mL.
  2. Multiply by the dilution factor: 620 × 10⁴ = 6,200,000.
  3. Original sample = 6.2 × 10⁶ CFU/mL.

Transfusion science and immunology:

Question 4: (3 marks)

A patient is group O RhD positive. Name the ABO antibodies in their plasma. Explain why transfusing group A red cells would be dangerous, and state which red cells they can safely receive.

Answer
  1. Group O plasma contains anti-A and anti-B.
  2. Anti-A would bind the A antigen on the transfused cells. These antibodies are mainly IgM, which activates complement and destroys the cells inside the blood vessels: an acute haemolytic transfusion reaction.
  3. The patient can receive group O red cells, either RhD positive or RhD negative.

Cellular pathology:

Question 5: (3 marks)

A nucleus measures 12 mm on a micrograph taken at × 1,500 magnification. Calculate its actual diameter in micrometres. Name the stain in an H&E section that colours nuclei blue-purple.

Answer
  1. Convert the image size: 12 mm = 12,000 µm.
  2. Actual size = image size ÷ magnification = 12,000 ÷ 1,500 = 8 µm.
  3. The stain is haematoxylin. Eosin stains the cytoplasm pink.

Want more like these? Medly can set you new questions on the same topics and mark your working, so you can see exactly where the marks go.

Frequently asked questions

What's involved in biomedical science?

You study how the body works and how disease changes it, then the lab methods used to diagnose it. The degree builds up to six core disciplines: clinical biochemistry, haematology, medical microbiology, cellular pathology, immunology and transfusion science.

Is biomedical science hard?

It's demanding, mainly because of the chemistry, lab maths and data interpretation. Students with secure A-Level Biology and Chemistry usually find the first year manageable.

Is biomedical science the same as medicine?

No. Medicine trains you to diagnose and treat patients directly. Biomedical science trains you in the laboratory science behind diagnosis, and graduates often work in hospital labs or research.

What A-Levels do you need for biomedical science?

A-Level Biology is the usual requirement, and many courses also ask for Chemistry. Our entry requirements guide compares offers across UK universities.

What biomedical science jobs pay the most?

In the NHS, the highest-paid roles are consultant scientists. NHS Health Careers lists their pay at £88,364 to £119,133.

Can you become a biomedical scientist with a biomedical science degree?

Yes, if you also register with the Health and Care Professions Council (HCPC). An IBMS-accredited degree is the most direct route; our trainee guide explains each step.

Try Medly for free