Study tips8 min read

How VCE study scores are calculated: a worked example for 2027

Work through SAC and exam weightings, standardisation, ranking and VTAC scaling, with every step of the maths shown.

Medly Team15 November 2026
On this page

A VCE study score is a number from 0 to 50 that shows where you rank among every student in Victoria who took the same subject that year. VCAA sets the average at 30 and the standard deviation at 7, so most students land between 23 and 37. To get there, VCAA standardises your result in each graded assessment, weights each one using the study design, ranks the whole state on the combined total and converts your rank into a score. The worked example below takes you through every step, with all the maths shown, so you can run it on your own marks for 2027 or plug them into our free study score calculator worksheet.

What is a VCE study score?

Your study score is a ranking written as a number. It isn't a percentage or a mark out of 50. A 30 puts you in the middle of the state for that subject, a 37 puts you about one standard deviation above the middle, and a 23 about one below.

VCAA's score aggregation method fits scores to a normal curve with a mean of 30 and a standard deviation of 7, cut off at 0 and 50. Because the score depends on everyone else's results, the same raw mark can earn a different study score in a different year.

Study scoreShare at or aboveWhat it means
30About 53%Middle of the state
35About 26%Roughly the top quarter
40About 9%Top tenth, a "40+" score
45About 2%About 2 in every 100 students
50Under 1%The maximum

Source: VCAA score aggregation (mean 30, standard deviation 7), with shares calculated from the normal curve. Shares are approximate and vary more in small subjects. Last checked: 14 November 2026.

Deakin University's calculator guide gives the same picture: a study score of 40 puts you ahead of about 91% of students in that subject.

How are SACs and exams weighted in VCE?

Each subject has a small set of graded assessments. These are School-assessed Coursework (SACs) for Units 3 and 4, School-assessed Tasks (SATs) in some arts and technology subjects, and one or two end-of-year exams. VCAA reports a grade from A+ to E or UG for each one, and the study design sets how much each counts.

SubjectSACsExams
English and EALUnit 3 25%, Unit 4 25%Exam 50%
Maths MethodsUnits 3 and 4 40%Exam 1 20%, Exam 2 40%
Specialist MathsUnit 3 20%, Unit 4 20%Exam 1 20%, Exam 2 40%
BiologyUnit 3 20%, Unit 4 30%Exam 50%
ChemistryUnit 3 20%, Unit 4 30%Exam 50%
PhysicsUnit 3 30%, Unit 4 20%Exam 50%
PsychologyUnit 3 20%, Unit 4 30%Exam 50%

Source: VCAA assessment summary and VCE study designs. Last checked: 14 November 2026.

In most of these subjects the exams carry half the study score or more, but SACs still count for 40 to 50%. Study designs are reaccredited on a cycle, and some change partway through your VCE, so check the assessment page for your own subject before you plan for 2027. The Specialist Mathematics study design, for example, is accredited from 2023 to 2027.

How VCAA turns your marks into a study score

  1. Your teachers mark your SACs, which places everyone in your school's cohort in order.
  2. VCAA statistically moderates your school's SAC scores against the same students' exam results. The level and spread of the SAC marks shift to match, but your order within the school stays the same.
  3. Each graded assessment is standardised: the state mean is subtracted from your score and the result is divided by the state standard deviation. This gives a z-score, where 0 is exactly average.
  4. Each z-score is multiplied by its weighting, and the results are added together.
  5. Every student in the subject is ranked on that weighted total.
  6. Your rank is converted to a score on a curve with a mean of 30 and a standard deviation of 7, then reported as a whole number from 0 to 50.

Step 2 explains why your SAC rank matters so much. If you finish top of your school in SACs, moderation keeps you there. Your cohort's exam results then decide how strong the marks around you become.

Study score calculation: a worked example from raw marks

Take a student doing Mathematical Methods, weighted 20% for each unit's SACs, 20% for Exam 1 and 40% for Exam 2. The state means and standard deviations below are made up for the example, since the real ones are only known once results are out. The SAC marks are shown after moderation.

AssessmentWeightYour markState mean, SD
Unit 3 SAC20%78%65%, SD 15
Unit 4 SAC20%70%64%, SD 16
Exam 120%72%55%, SD 20
Exam 240%62%50%, SD 18

Source: illustrative figures. Weightings from the VCAA assessment summary. Last checked: 14 November 2026.

Step 1 is to standardise each assessment:

  1. Unit 3 SAC: (78 - 65) ÷ 15 = 13 ÷ 15 = 0.867
  2. Unit 4 SAC: (70 - 64) ÷ 16 = 6 ÷ 16 = 0.375
  3. Exam 1: (72 - 55) ÷ 20 = 17 ÷ 20 = 0.850
  4. Exam 2: (62 - 50) ÷ 18 = 12 ÷ 18 = 0.667

Step 2 is to weight each one and add them up:

  1. Unit 3 SAC: 0.20 × 0.867 = 0.173
  2. Unit 4 SAC: 0.20 × 0.375 = 0.075
  3. Exam 1: 0.20 × 0.850 = 0.170
  4. Exam 2: 0.40 × 0.667 = 0.267
  5. Weighted total: 0.173 + 0.075 + 0.170 + 0.267 = 0.685

Step 3 is to compare that total with the rest of the state. The weighted totals don't have a standard deviation of 1, because students who do well on one assessment usually do well on the others, but not every time. Suppose the state's totals have a mean of 0 and a standard deviation of 0.85. Your position is then 0.685 ÷ 0.85 = 0.806 standard deviations above average, which puts you ahead of about 79% of the subject.

Step 4 is to convert that position to a study score: 30 + (7 × 0.806) = 30 + 5.64 = 35.64, which gives a study score of 36.

Notice that 62% on Exam 2 was worth a lot. It was well above the state mean on a hard paper, and it carried the most weight. To try this with your own marks, download the study score worksheet. The formulas are built in, so you only change the marks, means and standard deviations.

How does scaling change your study score?

Scaling is done by VTAC, not VCAA, and it only affects your ATAR. Your study score on your results stays the same. VTAC turns each study score into a scaled score from 0 to 55, based on how strong each subject's cohort was across all their subjects. VTAC's scaling guide says this reflects how competitive each cohort is, not how hard the subject is thought to be.

Study scoreSpecialist MathsAccountingFoundation Maths
20292012
30433120
40514132
50555050

Source: VTAC 2025 Scaling Report, published 11 December 2025. Last checked: 14 November 2026.

A 30 in Specialist Maths scaled to 43 in 2025, while a 30 in Foundation Maths scaled to 20. Your raw result still matters most: a 45 in Accounting scaled to 46, above a 30 in Specialist Maths. Scaling also changes each year, and VTAC publishes a new report each December.

VTAC then builds your ATAR aggregate from your best English scaled score plus your next three best scaled scores. It adds 10% of a fifth and sixth scaled score if you have them. Each language gets an adjustment of about 5 at the average, which shrinks further from 30.

How accurate are study score calculators?

Calculators give you a sensible range, but not a prediction. Deakin's says its results are "estimates only", because they're based on the previous year's grade distributions. Two calculators can turn the same marks into scores a couple of points apart, for a few reasons:

  • They can't know this year's state means and standard deviations until results are out.
  • They can't see how moderation will adjust your school's SAC marks.
  • Many work from grades (A+ to UG), and one grade band can cover several study scores.
  • Some skip Step 3 above. Working out 30 + 7 × 0.685 gives 34.8, so the example would show 35 rather than 36.
  • Scaling estimates use last year's report, and scaling moves each year.

The most useful way to read a calculator is to ask which assessment has the most room to move your total. That is usually the most heavily weighted exam. If you want feedback on practice answers before then, Medly AI can mark them and show you where the next mark is. In our marking study of more than 30,000 answers, each marked by two qualified examiners, top AI models agreed with examiners more closely than the examiners agreed with each other.

Frequently asked questions

What is the highest study score you can get in VCE?

The highest study score is 50. A 50 sits nearly three standard deviations above the average of 30, so in a large subject it usually means the top fraction of 1%. After VTAC scaling, a study score can become a scaled score of up to 55.

Is a study score of 40 good?

Yes. A 40 puts you in roughly the top 9% of the state for that subject, which is why "40+" is the common benchmark for a strong result.

Is a study score of 30 bad?

No. A 30 is the state average for that subject, so you performed better than about half the students who took it.

Do SACs or exams count more?

In most subjects the exams count for half the study score or more, but SACs still make up 40 to 50%. Check the assessment page in your subject's study design for the exact split.

Does scaling change the study score on my results?

No. Your study score stays as VCAA reports it. VTAC's scaled scores are only used to calculate your ATAR.

Can I calculate my exact study score before results day?

No. You can estimate it, but the real state means, standard deviations and moderation are only known after the exams are marked. To practise the answers that move those numbers, Medly's free plan includes 5 marked questions, 20 AI tutor messages and 1 uploaded paper a day, with no card needed.

Try Medly for free